Dongguan Meizhiyuan Energy Saving Technology Co., Ltd.

PP meltblown filter
PP meltblown filter is a sterile, non-toxic and tasteless polypropylene particles after heating temperature, spinning, drawing, accepting shaping filter made of tubes with high filtering accuracy, flow rate, pressure, dirt holding capacity small size, high pressure, corrosion resistance and other characteristics.
Size: 10 inch, 20 inch, 30 inch, 40 inch, diameter: 62mm, inner diameter: 30mm, length: 25.2,50.4,76,102cm other GM models, with the cash. 30-inch, 40-inch frame with PP cotton, suitable for large-scale water treatment precision filter apply.

There precision filter: 5um, 10um, 1um models.
Model
PPF (polypropylene meltblown filter) -10 (length 10 ") - 5 (filtering accuracy 5U)
PPFP (with skeleton polypropylene meltblown filter) -10 (length 10 ") - 5 (filtering accuracy 5U)

Specifications (special specifications can be customized)
Length 10 "20" 30 "40" 50 "60"
Outside diameter (error of less than 1 mm) 60-150㎜
Diameter (error of less than 1 mm) 28,30㎜
Note: The maximum particle filtration efficiency of 99%; 95% initial accuracy filtration efficiency; measured filter length is 10 ", the pressure is 0.02Mpa,
Test medium is water. Other cartridges and so on.
b, maximum pressure: ≤0.5 Mpa; maximum voltage drop: 0.2 Mpa.
c, the maximum operating temperature: ≤60 0C.

■ high filtration precision, flow, uniform structure;
■ dust capacity, long life;
■ No additives, fiber easy to fall off;
■ good chemical compatibility;
■ inexpensive main application;
■ solvents, acids, bases filtration;
■ Pre various water filtration systems;
■ boiler water purification filters.